Drilling hole in Plexiglass of pedestal of 26m

Welcome to MYCBC Forums Boat Maintenance and Mods Drilling hole in Plexiglass of pedestal of 26m

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #10787
    Cobus KriekCobus Kriek
    Participant

    I need to flush mount a speaker after cutting a 5 inch hole in the plexiglass facing the coxwain. Has anyone drilled a large hole in the plexiglass without cracking it ? thanks Cobus Kriek Maple Ridge 403 710 7156

    Attachments:
    You must be logged in to view attached files.
    #10791
    Rick & SueRick & Sue
    Participant

    I have used a hole saw on my drill to cut several holes in the plexiglas with no issues.

    #10856

    Tip to cutting plexiglass or fibreglass … always start out in reverse so you score the glass first, before going forward to cut. And applying green painters tape where you’re cutting will help reduce the chipping.

    Darry

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Comments are closed.